TP2604 WB 10MHz Ultra-low Distortion, 36V RRO Opamps Rail-to-Rail Output
Ultra-low Distortion: 0.0001% at 1 kHz
Low Noise: 17 nV/√Hz
High Slew Rate: 6.5 V/μs
Wide Bandwidth: 10 MHz
Low Supply Current: 1.2mA per Amplifier
Wide Supply Range: 2.7 V to 36 V,
or Dual-Supply ±1.35 V to ±18 V
Low Input Offset Voltage: 0.5 mV Typical
Low VOS TC: 2.0 µV/°C
Low Input Bias Current: 0.04 pA Typical
Rail-to-Rail Output Voltage Range
Unity Gain Stable for 220pF Capacitive Load
Drive 600 Ω Load
–40°C to 125°C Operation Range
Green, Popular Type Package
The TP2604/2608 are ultra-low distortion, high-voltage
CMOS op-amps featuring THD+N of 0.0001% at 1kHz.
This feature along with its low noise, very high PSRR
makes TP260x ideal choices for professional audio
equipments.
The TP2604/2608 are unity gain stable with 220pF
capacitive load with a wide 10MHz bandwidth, 6.5V/μs
high slew rate, which makes the device appropriate for
current-to-voltage converters.
The TP2604/2608 can operate from a single-supply
voltage of +2.7V to +36.0V or a dual-supply voltage of
±1.35V to ±18.0V. Rail-to-rail output characteristics
allow the full power-supply voltage to be used for signal
range.
The TP2604 is dual channel version available in 8-pin
SOIC and MSOP package. The TP2608 is quad
channel version available in 14-pin SOIC and TSSOP
package.
Professional Audio Equipments
Line Drivers or Line Receivers
Pre-amplification and Filtering
PCM DAC I/V Converter
Transducer Amplifier
Data Acquisition