30p ESP32 base -IO Shield for ESP32 Core Board

30p ESP32 base -IO Shield for ESP32 Core Board
30p ESP32 base -IO Shield for ESP32 Core Board30p ESP32 base -IO Shield for ESP32 Core Board30p ESP32 base -IO Shield for ESP32 Core Board
รหัสสินค้า M1144-30P
หมวดหมู่ ESP32 ESP-32
ราคา 50.00 บาท
น้ำหนัก 50 กรัม
ลงสินค้า 24 ส.ค. 2564
อัพเดทล่าสุด 20 ก.พ. 2566
ขออภัย สินค้าหมด
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Fixed ESP32 Reset To Bootloader
Fixed Getting the ESP32 to accept a flash without pressing button 
ESP32 Boot Mode Selection
Add capacitor 1uF-2.2uF  pin EN to GND




NodeMCU-32S
http://esp32.net/

ESP32 (WROOM32) is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, 
and power management module. The entire solution takes up the least amount of printed circuit board area.
This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips by TSMC 40nm low power technology,
power and RF properties best, which is safe, reliable, and scalable to a variety of applications.
 
Features:
 

High performance-price ratio
Small volume, easily embeded to other products
Strong function with support LWIP protocol, Freertos
Supporting three modes: AP, STA, and AP+STA
Supporting Lua program, easily to develop
https://espressif.com/en/esp-wroom-32/resources
http://esp32.net/
Development Board: https://github.com/Nicholas3388/LuaNode 
https://github.com/SmartArduino/SZDOITWiKi/wiki/ESP8266---ESP32

NodeMCU: https://github.com/nodemcu/nodemcu-firmware/tree/dev-esp32

Arduino: https://github.com/espressif/arduino-esp32


Installation instructions using Arduino IDE Boards Manager

Starting with 1.6.4, Arduino allows installation of third-party platform packages using Boards Manager. We have packages available for Windows, Mac OS, and Linux (32 and 64 bit).

  • Install the current upstream Arduino IDE at the 1.8 level or later. The current version is at the Arduino website.
  • Start Arduino and open Preferences window.
  • Enter https://dl.espressif.com/dl/package_esp32_index.json into Additional Board Manager URLs field. You can add multiple URLs, separating them with commas.
  • Open Boards Manager from Tools > Board menu and install esp32 platform (and don't forget to select your ESP32 board from Tools > Board menu after installation).

Stable release link: https://dl.espressif.com/dl/package_esp32_index.json

Development release link: https://dl.espressif.com/dl/package_esp32_dev_index.json


Package included:

1 x ESP32 Development Board








 
https://www.youtube.com/watch?v=_eu39u45XVk
 
https://www.youtube.com/watch?v=SC7S4DXWpBI
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
ESP32 #32: ESP32 Smart LED Prototype + ESP32 Giveaway

 
 
 
 
 
 
 
 
 
 
 
 
ESP32 #52: using PushBullet for sending Push Notification

Oscilloscope as a Display (ESP32, DAC, 3D, Camera)

ESP32 Game Console Audio

ESP32 #52: using PushBullet for sending Push Notification
ESP32 #52: using PushBullet for sending Push Notification
ESP32 #52: using PushBullet for sending Push Notification





 


 

*

1.4.1 CPU and Memory

  • Xtensa® single-/dual-core 32-bit LX6 microprocessor(s), up to 600 DMIPS (200 DMIPS for single-core microprocessor)
  • 448 kB ROM
  • 520 kB SRAM
  • 16 kB SRAM in RTC
  • QSPI flash/SRAM, up to 4 x 16 MB
  • Power supply: 2.3V to 3.6V
1.4.2 Clocks and Timers
  • Internal 8 MHz oscillator with calibration
  • Internal RC oscillator with calibration
  • External 2 MHz to 60 MHz crystal oscillator (40 MHz only for Wi-Fi/BT functionality)
  • External 32 kHz crystal oscillator for RTC with calibration
  • Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group
  • RTC timer with sub-second accuracy
  • RTC watchdog
  •  
1.4.3 Advanced Peripheral Interfaces 
  • 12-bit SAR ADC up to 18 channels 
  •  2 × 8-bit DAC 
  • 10 × touch sensors 
  • Temperature sensor 
  • 4 × SPI 
  • 2 × I2S 
  • 2 × I2C 
  • 3 × UART 
  • 1 host (SD/eMMC/SDIO) 
  • 1 slave (SDIO/SPI) 
  • Ethernet MAC interface with dedicated DMA and IEEE 1588 support 
  • CAN 2.0 
  • IR (TX/RX) 
  • Motor PWM 
  • LED PWM up to 16 channels 
  • Hall sensor Espressif Systems
  • Ultra-low-noise analog pre-amplifier 
  •  
1.4.4 Security 

  • IEEE 802.11 standard security features are all supported, including WFA, WPA/WPA2 and WAPI 
  • Secure boot 
  • Flash encryption 
  • 1024-bit OTP, up to 768-bit for customers 
  • Cryptographic hardware acceleration: 
    • – AES      
    • – HASH (SHA-2) library
    • – RSA 
    • – ECC 
    • – Random Number Generator (RNG)
1.4.5 Development Support
  • SDK firmware for fast online programming 
  • Open-source toolchains based on GCC
1.5 Applications 
• Generic low-power IoT sensor hub
• Generic low-power IoT loggers
• Video streaming from camera
• Over The Top (OTT) devices
• Music players
 – Internet music players
– Audio streaming devices
• Wi-Fi-enabled toys
– Loggers
– Proximity sensing toys
• Wi-Fi-enabled speech recognition devices
• Audio headsets
• Smart power plugs
• Home automation
• Mesh network
• Industrial wireless control
• Baby monitors
• Wearable electronics
• Wi-Fi location-aware devices
• Security ID tags
• Healthcare
– Proximity and movement-monitoring trigger devices
– Temperature-sensing loggers
*



*

*










• 16 kB SRAM in RTC
• QSPI flash/SRAM, up to 4 x 16 MB
• Power supply: 2.3V to 3.6V

1.4.2 Clocks and Timers

• Internal 8 MHz oscillator with calibration
• Internal RC oscillator with calibration
• External 2 MHz to 60 MHz crystal oscillator (40 MHz only for Wi-Fi/BT functionality)
• External 32 kHz crystal oscillator for RTC with calibration
• Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group
• RTC timer with sub-second accuracy
• RTC watchdog
 

วิธีการชำระเงิน

ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาบิ๊กซี รามคำแหง สะสมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาคลองจั่น ออมทรัพย์
บมจ. ธนาคารกรุงไทย สาขาเดอะมอลล์บางกะปิ ออมทรัพย์
บมจ. ธนาคารกสิกรไทย สาขาโลตัส บางกะปิ ออมทรัพย์
พร้อมเพย์ สาขา- mobile
Scan this!
กิตติ แซ่เอี้ยว
096-xxxxxx-3
Accept All Banks | รับเงินได้จากทุกธนาคาร
  • ค่าธรรมเนียม 3.9% + 11 THB
  • การชำระผ่าน PayPal คุณไม่จำเป็นต้องแจ้งชำระเงิน เนื่องจากระบบจะจัดการให้คุณทันที ที่คุณชำระเงินเสร็จสมบูรณ์

CATEGORY

TRACKCODE

  • ค้นหา
*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

CONTACT US

096-898-2243

STATISTICS

หน้าที่เข้าชม5,181,102 ครั้ง
ผู้ชมทั้งหมด1,580,442 ครั้ง
ร้านค้าอัพเดท22 ต.ค. 2568

MEMBER

Join เป็นสมาชิกร้านค้า

ร้านmcucity
ร้านmcucity
/www.mcucity.com/
Join เป็นสมาชิกร้าน
815
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
ติดตามร้านของเราผ่านแอพได้แล้ววันนี้
  • พิมพ์ “mcucity” ในช่อง Search
  • หรือเข้าจากรายการร้านค้าโปรดของฉัน
พูดคุย-สอบถาม