WS2812B 30/60/144 Light 5050 SMD LED5V Built-in IC Symphony Full Color Horse Race Programmable Light Strip
1. Product model: WS2812 Symphony light bar one meter 30 lights / 60 lights / 144 lights;
2. Light source: SMD 5050 LED;
3. Plate: FPCB;
4. Chip: Taiwan Epistar chip, and other chips in Taiwan;
5, IC model: WS2811 IC (1 meter 30/60/144 ICs, 1 IC controls 1 LED light) ;
6, gray level: 256 levels, (1 meter 30/60/144 pixels);
7. LED quantity: 30 lights / meter 60 lights / meter 144 lights / meter ;
8. Luminous angle: 180 °;
9, luminous color: can be adjusted to white, red, yellow, blue, green, etc. by the controller;
10.Standard working voltage: DC 5V;
11. Power: 30 lamps: 9W ± 10% / meter
60 lights: 18W ± 10% / meter
144 lights: 43.2W ± 10% / meter ;
12, waterproof grade: not waterproof, casing (IP67);
13.FPCB board size: width: 10 mm, thickness: 3 mm;
14, FPCB color: white, black;
15.Our company can provide matching Symphony controller and power supply
main feature:
1. Control principle: An IC controls an LED to form a loop (a group), and the controller controls the circuits in the FPCB through the control IC to control different effects of the LED light bar changes; such as flicker, chase, and jump, Clockwise, counterclockwise, monochromatic, color-changing, single chase from beginning to end, running water, simulated lightning, etc .; the effect of this light bar is not limited to the 94 built-in effects of the current controller. , Write by yourself; arranged in the form of screen can display, text, letters, pictures, animation, and so on.
2.Environmental protection and safety: Use high-quality and bright SMD 5050 LED It has the characteristics of low power consumption, low heat generation, no glare, and impact resistance. Low voltage DC 5V, 12V power supply, high safety and reliability.
3. Rich and diverse colors can be adjusted arbitrarily through the controller according to customer needs.
4. Long service life: The average service life is 50,000 hours.
5. Cutting and welding are convenient and free: each group of LEDs can form a loop, which can be arbitrarily cut and welded along the tangent line above to meet the customer's requirements for various light bar lengths.
6, soft: using a soft FPCB board as the substrate, can be docked, bent, cut and fixed on the uneven surface at will.
7, light and thin: suitable for installation in narrow spaces.
Use range:
1. Polygonal walls and water drops on hotels / nightclubs / KTVs, etc., decorate the atmosphere;
2. Buildings, advertising walls, signboards, festivals and other decorative areas have a beautiful / brightening effect on the city;
3. Home decoration lighting (staircase, door frame, bar counter, wine cabinet, wardrobe, TV cabinet, DIY home decoration ...);
4. Car beauty (body, bottom ...);
5. The outline of the iconic buildings, such as towers, bridges, parks, etc., with the starting point embellished with lighting effects.
6. Illumination signals (such as various luminous indication signs)
7.Edge-Lighting transparent or diffused material
8.Support underwater lighting projects
9. Canopy and bridge arched edge / amusement park / theater / aircraft cabin lighting
Installation method and precautions:
1. Indoor installation: LED light strips are relatively simple for indoor installation, as they do not have to withstand wind and rain. During installation, you can directly remove the sticker on the 3M double-sided tape on the back of the light bar, and then fix the light bar to the place where it needs to be installed and press flat. If you encounter a corner or the strip is too long or too short, the LED strips can be cut or welded separately at each set of tangent lines with scissors marks.
2. Outdoor installation: Since outdoor installation can withstand wind and rain, it cannot be fixed with 3M glue. Therefore, outdoor installation often uses a card slot to fix it. It needs to be cut and connected. The method is the same as indoor installation, but it requires additional equipment Waterproof glue to consolidate the waterproof effect of the connection points.
3. Power connection method: The general voltage of the LED magic light strip is DC5V, so you need to use a switching power supply. The size of the power supply is determined by the power of the LED strip and the connection length.
4. Controller connection mode: LED marquee strips and RGB full-color strips require controllers to achieve changing effects, and the control distance of each controller is different. Generally speaking, the control distance of simple controllers is 10 to 15 meters, the control distance of the remote controller is 15 to 20 meters, and the longest distance can be controlled to 30 meters. If the LED light strip is connected for a long distance and the controller cannot control such a long light strip, then a power amplifier is needed for tapping.