SN74HC125 (DIP14) Quadruple Bus Buffer Gates With 3-State Outputs

SN74HC125 (DIP14) Quadruple Bus Buffer Gates With 3-State Outputs

Description

The SNx4HC125 device is a quadruple set of bus buffer gates and features independent line drivers with 3-state outputs. The SNx4HC125 is designed for 2-V to 6-V V_CC operation. Each output is disabled when the associated output-enable (OE) input is high.

To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Features

• Wide Operating Voltage Range of 2 V to 6 V
• High-Current 3-State Outputs Interface Directly
  With System Bus or Can Drive Up to 15 LSTTL
  Loads
• Low Power Consumption, 80-µA Maximum I_CC
• Typical t_pd = 11 ns
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 µA Maximum