100Wx2 XH-M190 TDA3116D2 DC 12V-24V Class D Stereo HIFI amplifier สำเนา

100Wx2 XH-M190 TDA3116D2 DC 12V-24V Class D Stereo HIFI amplifier สำเนา
รหัสสินค้า M2007
หมวดหมู่ MP3, Amp, SD-card
ราคา 220.00 บาท
น้ำหนัก 150 กรัม
ลงสินค้า 6 ก.ค. 2561
อัพเดทล่าสุด 13 พ.ค. 2564
ขออภัย สินค้าหมด
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Tags : Amplifier, PAM
Proposed power supply DC 12-24V  or more switching power supply. This board is a finished board, a received can be used.
Using two new imports TPA3116 amplification chip, combined with nano-technology, in the field of digital power amplifier ahead.
Clear sound, strong amplification function, high efficiency, high frequency response density.

 

 
Product name Digital audio amplifier board
Product number XH-M190
Chip Name TPA3116D2
Input power DC12-24V
Output Power 2 * 100W
input resistance 2 * 51 kohm
Power efficiency 90% or more
Output match 4-8 ohm
Frequency response range 14Hz-100kHz
Signal to noise ratio 100db
physical dimension 105 * 65 * 23mm
Product Weight 90g

 

 

1. Wide voltage range: DC12-26V
2. Efficient Class D amplifier board, both more than 90% of the power efficiency and low idle loss characteristics,advanced modulation system configuration,multiple switching frequencies prevent AM interference.
3. TPA3116D2 Advanced Oscillation / PLL,the circuit uses multiple switching frequency options to suppress AM interference;with the Master-Slave mode option, you can also synchronize multiple devices.
4. TPA3116D2 device for short circuit, overheating, overvoltage, undervoltage, and DC and other faults provide comprehensive protection. In the case of an overload, the device reports a failure condition to the processor, preventing itself from being destroyed.
 

1. Digital amplifier circuit overload capability is much higher than the analog amplifier.
2. Digital amplifier only work in the switch state, will not produce crossover distortion.
3. Digital amplifier speaker speakers do not match the time to consider the problem of internal resistance.
4. Digital amplifier conversion without using any template to enlarge the feedback circuit, thus avoiding the transient intermodulation distortion.
 


1. Using four brand-name resistors, 4000F 35V large capacity capacitors, filter and stable voltage performance is excellent.
2. Use of European-style terminals, more high-end, the appearance of the atmosphere, wiring locking more firmly.
3. Adopt sticky type individual radiator, M3 screw fixed, heat dissipation efficiency is better and firmer.
4. FR-4 glass fiber 1.6mm double-layer system board. Ultra-high strength crossing, to meet DIY design.
 
 
1.Switch machine without "POP" sound.
2.Comprehensive protection system, Switch writers impact design.
3.With power reverse connect protection, the speaker output short circuit protection.
 
Notice:
1.The best for the 24V power supply, do not exceed the voltage.
2.The audio output do not short circuit or to ground short circuit to each other
3.Please check carefully prior to power connection, make sure it is connection to electricity.
 
 
1 PCS High end digital amplifier board








*

วิธีการชำระเงิน

ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาบิ๊กซี รามคำแหง สะสมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาคลองจั่น ออมทรัพย์
บมจ. ธนาคารกรุงไทย สาขาเดอะมอลล์บางกะปิ ออมทรัพย์
บมจ. ธนาคารกสิกรไทย สาขาโลตัส บางกะปิ ออมทรัพย์
พร้อมเพย์ สาขา- mobile
Scan this!
กิตติ แซ่เอี้ยว
096-xxxxxx-3
Accept All Banks | รับเงินได้จากทุกธนาคาร
  • ค่าธรรมเนียม 3.9% + 11 THB
  • การชำระผ่าน PayPal คุณไม่จำเป็นต้องแจ้งชำระเงิน เนื่องจากระบบจะจัดการให้คุณทันที ที่คุณชำระเงินเสร็จสมบูรณ์

CATEGORY

TRACKCODE

  • ค้นหา
*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

CONTACT US

096-898-2243

STATISTICS

หน้าที่เข้าชม5,167,603 ครั้ง
ผู้ชมทั้งหมด1,566,943 ครั้ง
ร้านค้าอัพเดท6 ก.ย. 2568

MEMBER

Join เป็นสมาชิกร้านค้า

ร้านmcucity
ร้านmcucity
/www.mcucity.com/
Join เป็นสมาชิกร้าน
805
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
ติดตามร้านของเราผ่านแอพได้แล้ววันนี้
  • พิมพ์ “mcucity” ในช่อง Search
  • หรือเข้าจากรายการร้านค้าโปรดของฉัน
พูดคุย-สอบถาม