Nu-Link Programmer

Nu-Link Programmer
รหัสสินค้า PRO-NULINK
หมวดหมู่ ARM,STM32,STM8S,PIC
ราคา 500.00 บาท
น้ำหนัก 60 กรัม
ลงสินค้า 11 มี.ค. 2561
อัพเดทล่าสุด 14 ต.ค. 2565
ขออภัย สินค้าหมด
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Nu-Link Programmer
  • USB←→SWD bridge
  • Support On-line and Off-line ICP (In-Circuit Programming)
  • USB Plug

Nu-Link ICP emulator downloader

With offline (offline) download!

Nu-LinkNot only is the emulator, or online, offline downloader, is a research and development to production from all applicable
3-in-1Tools


Branch
Support KEIL, IAR FOR ARM and other IDE tools

Flash breakpoints, regardless of the code in RAM or ROM, you can use unlimited breakpoints, unlimited number of breakpoints Cortex chip


Serial debugging of ARM Cortex-M0 device (SWD)

Memory access support program during operation, terminal emulation, and serial debug output


Nu-Link also supports on-chip program to upgrade and update (In-Circuit Program functions), for the development of mass production to achieve integration, simplified operation

USB HID device driver-free, plug and play


Firmware continuous automatic updates

Support WINXP, WIN7 32 / 64bit


Support for new Tang M0, M4 whole series MCU,MCS-51, N76Exxx

 

 

Interface definition is the official standard version:


1.VCC
2.DATA
3.CLK
4.RST
5.GND

Programming software:


Features

In-Circuit programming target chip
Online/offline programming mode
Backup flash data of target chip (If the target chip is not flash protected)
Backup offline flash data of Nu-Link dongle (if offline data has been unprotected)
Write software serials number (SN) to target chip
Limit the maximum programming count
Data encryption for online/offline programming
Batch mode for online/offline programming
 
2 Preparing for ICP Programming Tool
2.1 System Requirements
The hardware and software requirements for installing the ICP Programming Tool system
are as follows:
PC/AT compatible machine with Pentium or higher CPU
XVGA(1024*768) color monitor
At least 512M RAM for best performance
At least 20M free disk space
Windows 2000/XP/Vista/7

2.2 Hardware Installation
Step 1: Plug USB cable into the USB port of the ICP Programming Tool board.
Step 2: Connect the ICP Programming Tool board with ICE interface of DEV board.

2.3 Software Installation
Please run the installer package to install the software

วิธีการชำระเงิน

ธนาคารกรุงเทพ จำกัด (มหาชน) สาขาบิ๊กซี รามคำแหง สะสมทรัพย์
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาคลองจั่น ออมทรัพย์
บมจ. ธนาคารกรุงไทย สาขาเดอะมอลล์บางกะปิ ออมทรัพย์
บมจ. ธนาคารกสิกรไทย สาขาโลตัส บางกะปิ ออมทรัพย์
พร้อมเพย์ สาขา- mobile
Scan this!
กิตติ แซ่เอี้ยว
096-xxxxxx-3
Accept All Banks | รับเงินได้จากทุกธนาคาร
  • ค่าธรรมเนียม 3.9% + 11 THB
  • การชำระผ่าน PayPal คุณไม่จำเป็นต้องแจ้งชำระเงิน เนื่องจากระบบจะจัดการให้คุณทันที ที่คุณชำระเงินเสร็จสมบูรณ์

CATEGORY

TRACKCODE

  • ค้นหา
*ใส่ เบอร์มือถือ หรือ email ที่ใช้ในการสั่งซื้อ

CONTACT US

096-898-2243

STATISTICS

หน้าที่เข้าชม5,180,581 ครั้ง
ผู้ชมทั้งหมด1,579,921 ครั้ง
ร้านค้าอัพเดท20 ต.ค. 2568

MEMBER

Join เป็นสมาชิกร้านค้า

ร้านmcucity
ร้านmcucity
/www.mcucity.com/
Join เป็นสมาชิกร้าน
814
สมัครสมาชิกร้านนี้ เพื่อรับสิทธิพิเศษ
ติดตามร้านของเราผ่านแอพได้แล้ววันนี้
  • พิมพ์ “mcucity” ในช่อง Search
  • หรือเข้าจากรายการร้านค้าโปรดของฉัน
พูดคุย-สอบถาม